In identifying the workmanship, it is necessary to look at the purchase of Stainless Steel Kitchen Cabinets . Here are some details:

1. It depends on the cutting board
The most important part and the first process of cabinet production is to look at the cutting board. The cutting board is also called the cutting of the board. Large specialized enterprises use professional equipment to process the size, control the dimensional accuracy of the material selection, the performance of the equipment is stable, and the dimensional accuracy of the plate is high, and there is no stubble on the edge of the board. Small hand-cutting saws are used in small workshops, and even a woodworking cutting saw is used to set up a simple operating table. The size error of the board produced by this simple equipment is large, often more than 1 mm, and often appears. The phenomenon of stubble, that is, the board substrate is exposed.

2. Depends on punching
Also emphasize punching. The current panel furniture is assembled by three-in-one connectors, which requires many positioning and connection holes in the board. The fit and precision of the hole position will affect the structural rigidity of the cabinet box. Professional large factories use 32-module multi-row drills to complete several holes on the edge and surface of a board at a time. These holes are all the same positioning reference, and the accuracy of the size is guaranteed. Small manual factories use row drills, or even pistol drills to make holes, and the size error is large.

3. It depends on the door panel
It depends on the assembly effect of the entire cabinet. The small gaps in the cabinet should be even, and the door panel should be straight. The door panel is the face of the cabinet, just as important as the human face. The door panels produced by some factories are subject to moisture and deformation due to improper treatment of the substrate and surface technology. This can be seen at a glance.

4. Watch the slide
Also pay attention to the slide rail of the drawer. Although it is a small detail, it is an important part of the quality of the cabinet. Due to an error in the hole position and the size of the board, the drawer is not smoothly pulled or loosened left and right. Pay attention to whether the drawer gap is even.

The above content is organized and shared by the Handmade Sink manufacturer, hoping to help those in need.