Components of Flange Insulation Gasket Kit

　　Specially designed gasket

　　Non-metallic sleeve

　　Non-metallic washers

　　The Flange Insulation Gasket Kit includes specially designed non-conductive gaskets to provide the necessary sealing.

　　The stud sleeve is used to prevent metal-to-metal contact between the stud and the flange. It is made of hard non-metallic materials and can handle a certain degree of abuse when tightening flange joints.

　　The next component of the kit is the washing machine. Non-metallic washers prevent the nut from contacting the flange. In this way, the cs and ss flanges can be completely disconnected. In cathodic protection, the spacer kit works in the same way and prevents current from flowing from underground pipelines to aboveground pipelines.

　　Good practice of Flange Insulation Gasket Kit from Kammprofile Gaskets Suppliers

　　There are few good practices that can use this special toolkit to realize the full benefits of flange isolation.

　　If the joints are different, the gap between the two flanges should be avoided. If there is a gap on the outside of the flange joint, water or dust may accumulate. This will serve as a path leading to corrosion. Similarly, it is best to match the gasket at the pipe ID. If the inner diameter of the gasket is larger than the inner diameter of the pipe, turbulence will be generated in the fluid. This is also an undesirable situation, so you must match the ID.