How to deal with the problem of China glue gun?

1. No glue from the glue gun

The glue gun is not cleaned, and the glue solidifies and blocks the channel. At this time, the channel must be cleared.

The viscosity of the glue is not suitable. If the viscosity is too high, the resistance will increase, the glue will not be continuous or the glue will not be produced. Therefore, choose the glue that meets the requirements.

2. Glue gun leaks

Air inlet leaking: the air pump and the glue gun air port connection is not sealed enough, you can choose to change the joint or connect the air pipe to the glue gun air port and fix it with iron wire.

The gun body leaks: you can remove the screw, reinstall it, and then tighten the screw. Or seal it with glass glue, if the air leaks seriously, please contact the supplier to replace the gun body.

Air leakage at the front of the barrel: The glue is too long, causing the front cover to not be tightened. Or the front cover itself is screwed in place.

Air leakage at the rear end of the gun: The sealing ring is damaged, or the rear silencer is damaged, please contact the supplier for replacement.

Contact us for more relevant knowledge: https://www.luxitools.com/