How to use the electric tile cutter and How to make the tile cutter more durable With the development of the machinery industry, electric ceramic tile cutters have replaced traditional manual cutters and become a new generation mainstream in the ceramic tile processing industry. Relying on its own advantages, it has been recognized by the market and has gained many customers after years of continuous innovation. Whatsapp: +86 152 78353800 Email: hanistay@foxmail.com

6y3jJsxDdw47A9h.png

How to use the electric tile cutter? 1. Before use, check that the power supply voltage should be within 10% of the rated value. Before turning on the power, the switch should be in the off state. 2. Check carefully before use to see if there are any cracks or damages on the cutting disc. If any, please replace it immediately. 3. Check that the slices are in working condition, and the cutting operation can only be started without rubbing the master plate. 4. The working feed is required to be stable and not too strong. If the speed of the saw blade drops sharply, the feed force should be reduced to prevent overloading and damaging the machine. 5. It is strictly forbidden to remove the protective cover for cutting. 6. The saw blade cooling water source is tap water. Connect the water pipe to the tap before use, and the water output is appropriate. (Electric manual tile cutter) How to make the tile cutter more durable? 1. All the lubricating oil in the tile cutter should be discharged after one month of use, thoroughly cleaned, and replaced with new oil. 2. During operation, check the temperature of the main bearing lubricating oil, and it should not exceed 55°C. 3. Check whether the large and small gears drive smoothly and whether there is abnormal noise. 4. Check whether the current in the motor fluctuates abnormally. 5. Check whether the connecting fasteners in the machine are loose, oil leaking, or water leaking. 6. Check how the blade is worn, and replace it if there is a crack. 7. Check the main bearing and replace it if it is severely worn. 8. After the surface of the belt is worn to a certain extent, it can be turned over and used again. 9. When the inlet and outlet wire racks are worn out, they should be replaced in time. (Cutting blade of electric tile cutter) Ceramic tile processing machinery is a kind of equipment that has become popular in tile decoration in recent years. It is used for a series of deep processing such as slotting grooves for tiles, chamfering inner walls, round edges and polishing. Ceramic tile processing machinery is a kind of equipment that has become popular in tile decoration in recent years. It is used for a series of deep processing such as drawing grooves for tiles, chamfering the interior walls, rounding edges and polishing. Electric cutting machines have also developed with the development of life. Equipped with faucets, the advantages of directly reducing the temperature of the saw blade and reducing dust pollution are favored by many users.