1. Hexagon Flange Bolt cutting and punching

　　Because the strength of stainless steel is higher than that of general materials, stamping and shearing require higher pressure. If the gap between the cutter and the cutter is accurate, poor shearing and work hardening will not occur. Use plasma or laser cutting. When gas cutting or arc cutting is required, please grind the heat-affected zone and perform heat treatment.

　　 2. Bending process

　　 Thin plates can be bent to 180 degrees, but in order to reduce cracks on the curved surface, the thickness of the plate is given twice the radius in the rolling direction, and 4 times the thickness when bent in the straight direction. And scroll direction. Especially in welding, in order to prevent processing cracks, the surface of the welding area should be polished.

　　3. Deep drawing

　　It is easy to generate frictional heat during the deep drawing process. Therefore, stainless steel with high pressure and heat resistance should be used for molding together, and the oil adhering to the surface should be removed after processing.

　　 4. Welding

　　Before welding, rust, oil, water, paint, etc. which are harmful to welding should be thoroughly removed, and welding rods of suitable steel grade should be selected. The time interval of spot welding is shorter than that of carbon steel. Stainless steel brushes should be used to remove welding slag.

　　Threaded Rods And Eye Bolts after welding, the surface should be polished or cleaned to prevent partial corrosion or strength reduction.