Sponsored
Recent Updates
  • Handmade Sink Wholesalers Introduces Kitchen Renovation Tips
    2022-6-1

    Handmade Sink Wholesalers introduces the precautions for kitchen decoration:

    1. Reasonable size, the functional area of ​​the kitchen is generally divided into three parts: washing area, operation area, and cooking area. The reasonably sized kitchen functional area can make daily operations more comfortable and more comfortable.

    ①Washing area
    Height: generally height ÷ 2+5cm;Width: In addition to the width of the basin, a width of at least 30cm should be reserved on the side away from the operation area for draining the tableware and placing the cleaned fruits and vegetables;Depth: 55cm or 60cm, generally consistent with the depth of the operation area.

    ②Operation area
    Height: consistent with the washing area, the height is height ÷ 2+5cm;Width: at least 60cm or more, the operation area is too small, and it is easy to be in a hurry when preparing meals;Depth: 60cm, 55cm, or 35cm, the most common depth is 60cm, 55cm is used for small kitchens, and 35cm is mostly used for sideboards.

    2. The lighting is sufficient. When the kitchen is renovated, it is far from enough to design a ceiling lamp in the middle of the kitchen. In addition to making the light in the kitchen more uniform, the reasonable layout of the lighting can also make the atmosphere of the kitchen more uniform add romance.

    ①Lighting under the hanging cabinet: Install the light strip at the bottom of the hanging cabinet, in addition to playing the role of auxiliary lighting, the hidden design enhances the design sense of the kitchen, which is simple but not monotonous. can also be used The built-in LED lights in the back of the cabinet are bright and comfortable, making the kitchen look more upscale.

    ②Internal lighting: An LED circular ceiling light can be set inside the cabinet, with bright light and small volume that does not take up space. Or install light strips under the laminate to assist in lighting and at the same timeWhen adjusting the atmosphere, adds a bit of mood to the kitchen life.

    3. Moisture-proof and anti-fouling: The kitchen has a lot of water and gasoline, and if you don’t pay attention to cleaning, it will become messy and messy. If you add a little “mindfulness” to the details, it can not only greatly reduce the amount of daily housework, but also extend the life of the cabinet.

    ① Under-counter basin for sink: The sink adopts the installation method of the under-counter basin, which is convenient for the water on the countertop to flow into the basin smoothly, which is convenient for the cleaning of the countertop, and there is no need to worry about the edge of the sink becoming black due to the accumulation of bacteria, which looks more beautiful and generous.

    ②Mesa water retaining strip: When the kitchen is renovated, a water-retaining strip is installed on the countertop against the wall, which can prevent the dirty water from flowing into the back of the cabinet along the wall and prevent the cabinet from being corroded.

    ③ Cabinet skirting: The bottom of the cabinet is sealed with 7cm metal skirting and glass glue, which can not only prevent the accumulation of garbage at the bottom of the cabinet but also avoid friction with the ground when the cabinet door is opened and closed, causing the cabinet door to wear.

    ④Add aluminum foil board to the sink cabinet: The environment of the sink cabinet is relatively humid, which is easy to causes corrosion of the cabinet. Using a professional moisture-proof aluminum foil board and water glue strip for the next treatment can effectively separate the water and the board, and it is also very convenient to take care of.

    Through the above introduction, Lavatory Faucet Wholesalers hopes that you can simply refer to the content of this article in future use.
    https://www.afastainlesskb.com/
    Handmade Sink Wholesalers Introduces Kitchen Renovation Tips 2022-6-1 Handmade Sink Wholesalers introduces the precautions for kitchen decoration: 1. Reasonable size, the functional area of ​​the kitchen is generally divided into three parts: washing area, operation area, and cooking area. The reasonably sized kitchen functional area can make daily operations more comfortable and more comfortable. ①Washing area Height: generally height ÷ 2+5cm;Width: In addition to the width of the basin, a width of at least 30cm should be reserved on the side away from the operation area for draining the tableware and placing the cleaned fruits and vegetables;Depth: 55cm or 60cm, generally consistent with the depth of the operation area. ②Operation area Height: consistent with the washing area, the height is height ÷ 2+5cm;Width: at least 60cm or more, the operation area is too small, and it is easy to be in a hurry when preparing meals;Depth: 60cm, 55cm, or 35cm, the most common depth is 60cm, 55cm is used for small kitchens, and 35cm is mostly used for sideboards. 2. The lighting is sufficient. When the kitchen is renovated, it is far from enough to design a ceiling lamp in the middle of the kitchen. In addition to making the light in the kitchen more uniform, the reasonable layout of the lighting can also make the atmosphere of the kitchen more uniform add romance. ①Lighting under the hanging cabinet: Install the light strip at the bottom of the hanging cabinet, in addition to playing the role of auxiliary lighting, the hidden design enhances the design sense of the kitchen, which is simple but not monotonous. can also be used The built-in LED lights in the back of the cabinet are bright and comfortable, making the kitchen look more upscale. ②Internal lighting: An LED circular ceiling light can be set inside the cabinet, with bright light and small volume that does not take up space. Or install light strips under the laminate to assist in lighting and at the same timeWhen adjusting the atmosphere, adds a bit of mood to the kitchen life. 3. Moisture-proof and anti-fouling: The kitchen has a lot of water and gasoline, and if you don’t pay attention to cleaning, it will become messy and messy. If you add a little “mindfulness” to the details, it can not only greatly reduce the amount of daily housework, but also extend the life of the cabinet. ① Under-counter basin for sink: The sink adopts the installation method of the under-counter basin, which is convenient for the water on the countertop to flow into the basin smoothly, which is convenient for the cleaning of the countertop, and there is no need to worry about the edge of the sink becoming black due to the accumulation of bacteria, which looks more beautiful and generous. ②Mesa water retaining strip: When the kitchen is renovated, a water-retaining strip is installed on the countertop against the wall, which can prevent the dirty water from flowing into the back of the cabinet along the wall and prevent the cabinet from being corroded. ③ Cabinet skirting: The bottom of the cabinet is sealed with 7cm metal skirting and glass glue, which can not only prevent the accumulation of garbage at the bottom of the cabinet but also avoid friction with the ground when the cabinet door is opened and closed, causing the cabinet door to wear. ④Add aluminum foil board to the sink cabinet: The environment of the sink cabinet is relatively humid, which is easy to causes corrosion of the cabinet. Using a professional moisture-proof aluminum foil board and water glue strip for the next treatment can effectively separate the water and the board, and it is also very convenient to take care of. Through the above introduction, Lavatory Faucet Wholesalers hopes that you can simply refer to the content of this article in future use. https://www.afastainlesskb.com/
    Stainless Steel Kitchen Sink, Bathroom Faucet Manufacturers
    Ningbo AFA Kitchen And Bath Co., Ltd is China stainless steel kitchen sink manufacturers and stainless steel bathroom faucet factory, offer wholesale kitchen sink for sale online.
    0 Comments 0 Shares
  • Handmade Sink Suppliers Introduces The Decoration Features Of Cabinets
    2022-5-18

    Handmade Sink Suppliers introduces Renovation considerations for One Font Stainless Steel Kitchen Cabinets :

    1. Pay attention to the division of the kitchen area:Where is the preparation area, where is the cooking area, where is the storage area... These areas are required for a kitchen, and the location can be designed according to the size of the space.

    2. Pay attention to the length of the operating table:In a flat-shaped cabinet, all work is done on one line, but the workbench should not be too long, otherwise, it will reduce efficiency. In the case of not obstructing the passage, an adjustable panel can be arranged for emergency needs.

    3. Pay attention to the placement of items:According to the usual frequency of use, determine the placement of items on the in-line stainless steel cabinet. For example, pots and pans can be placed near the stove, the filter can be placed near the sink, and the location of the food cabinet should be far away from the heat dissipation holes of the kitchen utensils and the refrigerator. And keep it dry and clean.

    4. Pay attention to the height of the counter:When cooking, you need to bend over for a long time, and a reasonable height of the table can avoid long-term bending. For example, when the height of the countertop of the kitchen utensils is 15 cm away from the wrist when working on the countertop, it is a very suitable height.

    5. Pay attention to the height of the wall cabinet:The height of the flat-shaped stainless steel cabinet wall cabinet should be convenient to pick and place the items in the cabinet. The height of the wall cabinet should be avoided to meet and affect the operation while taking into account the storage capacity, it is recommended to use 250-300mm.

    6. Pay attention to the use of partitions:The open flat-shaped kitchen connected to the halls and rooms should be well separated. Wall cabinets and vertical cabinets can be used as partitions, and glass sliding doors should be installed to prevent oily smoke from spilling into the interior.

    7. Pay attention to direct sunlight:The lighting in the kitchen is mainly to avoid direct sunlight to prevent the food, dry goods, and condiments stored in the room from deteriorating due to light and heat.

    8. The kitchen must be ventilated:Ventilation is a must in a kitchen. However, there must be no window above the stove, otherwise, the flame of the gas stove will not be stable due to the influence of the wind, and it will even be blown out by the strong wind or cause catastrophe.

    Through the above introduction, Lavatory Faucet Suppliers hopes that you can simply refer to the content of this article in future use.
    https://www.afastainlesskb.com/
    Handmade Sink Suppliers Introduces The Decoration Features Of Cabinets 2022-5-18 Handmade Sink Suppliers introduces Renovation considerations for One Font Stainless Steel Kitchen Cabinets : 1. Pay attention to the division of the kitchen area:Where is the preparation area, where is the cooking area, where is the storage area... These areas are required for a kitchen, and the location can be designed according to the size of the space. 2. Pay attention to the length of the operating table:In a flat-shaped cabinet, all work is done on one line, but the workbench should not be too long, otherwise, it will reduce efficiency. In the case of not obstructing the passage, an adjustable panel can be arranged for emergency needs. 3. Pay attention to the placement of items:According to the usual frequency of use, determine the placement of items on the in-line stainless steel cabinet. For example, pots and pans can be placed near the stove, the filter can be placed near the sink, and the location of the food cabinet should be far away from the heat dissipation holes of the kitchen utensils and the refrigerator. And keep it dry and clean. 4. Pay attention to the height of the counter:When cooking, you need to bend over for a long time, and a reasonable height of the table can avoid long-term bending. For example, when the height of the countertop of the kitchen utensils is 15 cm away from the wrist when working on the countertop, it is a very suitable height. 5. Pay attention to the height of the wall cabinet:The height of the flat-shaped stainless steel cabinet wall cabinet should be convenient to pick and place the items in the cabinet. The height of the wall cabinet should be avoided to meet and affect the operation while taking into account the storage capacity, it is recommended to use 250-300mm. 6. Pay attention to the use of partitions:The open flat-shaped kitchen connected to the halls and rooms should be well separated. Wall cabinets and vertical cabinets can be used as partitions, and glass sliding doors should be installed to prevent oily smoke from spilling into the interior. 7. Pay attention to direct sunlight:The lighting in the kitchen is mainly to avoid direct sunlight to prevent the food, dry goods, and condiments stored in the room from deteriorating due to light and heat. 8. The kitchen must be ventilated:Ventilation is a must in a kitchen. However, there must be no window above the stove, otherwise, the flame of the gas stove will not be stable due to the influence of the wind, and it will even be blown out by the strong wind or cause catastrophe. Through the above introduction, Lavatory Faucet Suppliers hopes that you can simply refer to the content of this article in future use. https://www.afastainlesskb.com/
    Stainless Steel Kitchen Sink, Bathroom Faucet Manufacturers
    Ningbo AFA Kitchen And Bath Co., Ltd is China stainless steel kitchen sink manufacturers and stainless steel bathroom faucet factory, offer wholesale kitchen sink for sale online.
    0 Comments 0 Shares
  • Lavatory Cabinet Company Introduces The Requirements For The Use Of Double-row Cabinets
    2022-4-20
    Lavatory Cabinet Company Introduces What are the characteristics of Double-row Stainless Steel Kitchen Cabinets?

    1. Humanized and personalized design

    The common furniture styles in daily life are relatively single, and all have the disadvantages such as unadjustable size and fixed style. And Fili Custom Furniture can tailor-made furniture for the head of the household, such as custom-made wardrobes for the elderly and children in the family to facilitate their lives. Not only that, but custom-made furniture can also be customized according to their own individual needs, and make alternative personalized designs, bringing full individual needs and convenience to the head of the household.

    2. Different styles

    In terms of style, custom furniture also has considerable advantages, but due to the defects of the fixedness of finished furniture, it cannot meet everyone's wishes. Custom furniture can be designed and customized according to your favorite style.

    Through the above introduction,Basin Faucet Factory hopes that you can simply refer to the content of this article in future use.
    https://www.afastainlesskb.com/
    Lavatory Cabinet Company Introduces The Requirements For The Use Of Double-row Cabinets 2022-4-20 Lavatory Cabinet Company Introduces What are the characteristics of Double-row Stainless Steel Kitchen Cabinets? 1. Humanized and personalized design The common furniture styles in daily life are relatively single, and all have the disadvantages such as unadjustable size and fixed style. And Fili Custom Furniture can tailor-made furniture for the head of the household, such as custom-made wardrobes for the elderly and children in the family to facilitate their lives. Not only that, but custom-made furniture can also be customized according to their own individual needs, and make alternative personalized designs, bringing full individual needs and convenience to the head of the household. 2. Different styles In terms of style, custom furniture also has considerable advantages, but due to the defects of the fixedness of finished furniture, it cannot meet everyone's wishes. Custom furniture can be designed and customized according to your favorite style. Through the above introduction,Basin Faucet Factory hopes that you can simply refer to the content of this article in future use. https://www.afastainlesskb.com/
    Stainless Steel Kitchen Sink, Bathroom Faucet Manufacturers
    Ningbo AFA Kitchen And Bath Co., Ltd is China stainless steel kitchen sink manufacturers and stainless steel bathroom faucet factory, offer wholesale kitchen sink for sale online.
    0 Comments 0 Shares
  • Handmade Sink Factory Introduces The Classification Details Of Sink Drains
    Handmade Sink Factory introduces the classification of kitchen sink drains: 1. Flip-over drainer: The flap-type drainer can be rotated in any direction at will, causing the water in the basin to leak out. The airtightness of the flap-type drainer will decrease after being used for a long time, so that the basin cannot hold water. Or there is a situation where it cannot be turned over; the...
    0 Comments 0 Shares
  • The Characteristics Of The Washbasin Selection Of Floor Laundry Cabinet
    Most of the bathroom cabinets are made of high-quality waterproof board as the base material and surface material. The quality of these two materials will directly affect the overall quality of the bathroom cabinet. Therefore, when choosing the bathroom cabinet, we should focus on these two Material. The base material is the main body of the bathroom cabinet. It is concealed by the surface...
    0 Comments 0 Shares
  • The Selection Characteristics Of The Door Panel Material Of Bathroom Cabinet Floor-standing
    What are the door materials of Bathroom Cabinet Floor-standing? 1, 304 stainless steel plate: The whole cabinet is made of 304 stainless steel plate, which is healthy, environmentally friendly, durable, technological, waterproof, insect-proof, practical, and easy to clean. 2. Solid wood board: higher price. The door frame is made of solid wood, and the door core is made of a medium-density...
    0 Comments 0 Shares
  • Layout Strategy Of U-shaped Stainless Steel Kitchen Cabinets
    Layout details of U-shaped Stainless Steel Kitchen Cabinets: 1. It doesn't matter if there is a window, the wall cabinet is still made, and the part of the wall cabinet protruding from the window is connected to the cabinet inside. Since the wall cabinet is near the window, it is unavoidable that the inferior board is easy to corrode and age, and aggravate the release of formaldehyde....
    0 Comments 0 Shares
More Stories