CASCELL® HF- LOW DIELECTRIC FOAM New
$100
In stock
0 Reviews
Processing and production
With an extremely fine closed-cell structure, the foam has minimal resin uptake and problem-free compatibility with metallic facing materials due to the absence of corrosive effects.
Cascell ® HF foam is suitable for hand lay-up, prepreg processing and vacuum infusion at temperature up to 130°C and pressure up to 0.3 MPa.
Thermoforming and shaping
Cascell® HF can be easily thermoformed or CNC machined to meet customers’ requirements, bringing tremendous manufacturing advantages.
High precision, pre-shaped and ready-to-use foam cores in complex or simple geometries can also be supplied by the Cascell® Machining Department.
Compressive creep testing conditions:
Cascell® 50HF, 130℃/0.3MPa/2h
Cascell® 75HF, 150℃/0.3MPa/2h
Note: Technical data of our products are typical values for the nominal density.
With an extremely fine closed-cell structure, the foam has minimal resin uptake and problem-free compatibility with metallic facing materials due to the absence of corrosive effects.
Cascell ® HF foam is suitable for hand lay-up, prepreg processing and vacuum infusion at temperature up to 130°C and pressure up to 0.3 MPa.
Thermoforming and shaping
Cascell® HF can be easily thermoformed or CNC machined to meet customers’ requirements, bringing tremendous manufacturing advantages.
High precision, pre-shaped and ready-to-use foam cores in complex or simple geometries can also be supplied by the Cascell® Machining Department.
Compressive creep testing conditions:
Cascell® 50HF, 130℃/0.3MPa/2h
Cascell® 75HF, 150℃/0.3MPa/2h
Note: Technical data of our products are typical values for the nominal density.
Processing and production
With an extremely fine closed-cell structure, the foam has minimal resin uptake and problem-free compatibility with metallic facing materials due to the absence of corrosive effects.
Cascell ® HF foam is suitable for hand lay-up, prepreg processing and vacuum infusion at temperature up to 130°C and pressure up to 0.3 MPa.
Thermoforming and shaping
Cascell® HF can be easily thermoformed or CNC machined to meet customers’ requirements, bringing tremendous manufacturing advantages.
High precision, pre-shaped and ready-to-use foam cores in complex or simple geometries can also be supplied by the Cascell® Machining Department.
Compressive creep testing conditions:
Cascell® 50HF, 130℃/0.3MPa/2h
Cascell® 75HF, 150℃/0.3MPa/2h
Note: Technical data of our products are typical values for the nominal density.
0 Comments
0 Shares
301 Views
0 Reviews