Installation and use steps of the car wiring locator (this device is a concealed installation, it is recommended to be installed by a professional) before use:

It is recommended to record the card number on the flow card and the ID number on the device before inserting (the 13-digit number starting with 1064 at the bottom of the flow card is the card number), write down the flow card number and note it on the platform, in Device Details-Flow Note the card number so that it can be used for subsequent inquiries.

(2) The device uses a built-in high-sensitivity satellite positioning active antenna. In order to obtain a good signal and improve the positioning accuracy, please ensure that the front (curved surface) of the antenna faces the sky and is not covered by metal objects (if the vehicle has metal-coated glass). Please place the antenna in the area without film). Installation steps: Step 1: Remove the cover of the locator, and correctly insert the SIM card into the card slot when the device is turned off.

Step 2: Connect the wiring harness to the vehicle battery and the locator correctly. The red wire of the locator is connected to the positive pole of the car battery, and the black wire is connected to the negative pole of the car battery. Recommended installation location: under the front trim panel, under the rear windshield, around the instrument panel.

Step 3: Observe the indicator light of the locator. When the green light changes from long on to slow flashing, it means that the satellite positioning is working normally, and the blue light changes from long on to flashing every 3 seconds, which means GSM is working normally.

Step 4: Scan the QR code on the manual to download and install the APP, enter the device number (enter the 15-digit IMEI number on the box or the fuselage) and the default password on the login interface, and click Login to enter the system. For other function settings, please refer to the instruction manual of this product. Remarks: The first positioning of the 3g gps tracker has high environmental requirements. Please go to the open space for the first positioning, and ensure that the installation position of the 3g gps tracker is not blocked by metal objects, which generally takes 1-2 minutes.

3g gps tracker https://www.eelinktracker.com/3G-GPS-Tracker/