How to control the quality of Dustbin Mould?

　　Dustbin Mould has high requirements. Generally, most use environmentally friendly PP materials, which can produce a bright surface, and then undergo film printing and other processing. It becomes a high-end trash can, but there is no need to make a high-quality trash can. simple. First of all, the quality of the mold must be controlled, including mold design, mold assembly, hot runner and cold runner selection, etc. As the saying goes, laymen are excited and experts are at the door.

　　The annoying Dustbin Mould tells you how to better control the problems in the plastic mold processing process? The mold assembly is like assembling a machine. Every component and every screw must not be wrong, otherwise, the consequences will be very serious, ranging from minor to product defects, affecting production, and the other completely damaging the mold and causing scrap. Therefore, the assembly work must be very meticulous. During the assembly process, especially the cleaning of Crate Mould, especially the cleaning of waterways and screw holes, iron filings must be blown off, otherwise, the customer will be very angry and the consequences will be very serious.

　　The mold assembly is like assembling a machine. Every component and every screw must not be wrong, otherwise, the consequences will be very serious, ranging from minor to product defects, affecting production, and the other completely damaging the mold and causing scrap. Therefore, the assembly work must be very meticulous. In the assembly process, especially the cleaning of the mold, especially the cleaning of the waterway and screw holes, the iron filings must be blown off, otherwise, the customer will be very angry and the consequences will be very serious.