Transmission Chain manufacturers share the production process of conveyor chain lines:

1. The chain production line is mainly composed of three parts: conveyor, chain and power device. The carrier is the main part, the chain is the carrier, and the power device is to provide power for the operation of the equipment. Because the main body of the conveyor rack has to bear a large amount of cargo weight, steel is the main production material.
2. The engineer designs a plan in accordance with the requirements put forward by the customer, combined with the actual production conditions, products and other factors. After the plan is determined, the production department will arrange for the procurement of materials needed for production, and arrange personnel to put into production. Processing is required.
3. Assembly of conveyor rack: In the whole production, the production of conveyor rack must be completed first. The conveyor rack is the main component of the chain conveyor line. The staff cuts the steel, and then assembles it by welding according to the design drawings. When connecting the conveyor, pay attention to keeping all parts on the same level.
4. Equipment painting: After the assembly of the conveyor of the chain production line is completed by welding, the entire equipment should be painted. The color can be selected according to the painting. After the painting is completed, the equipment should be "dried" in the ventilated place. .
5. Install the power device: The chain production line is generally used to transport heavy items. The power required for the chain drive is provided by the motor. The choice of the motor can be specified by the customer. The power unit is installed on the high side of the conveyor.
6. Installation of conveyor chain: After installing the power unit, the chain used to carry the goods will be installed on the conveyor rack. When installing the conveyor chain, pay attention to whether the connection between the chains is tight, so as to avoid the phenomenon of disconnection during the operation of the equipment. At this point, a chain conveyor line with high efficiency is completed, and the production of the equipment needs to be checked by engineers before leaving the factory to ensure the normal operation of the equipment.

The above content is organized and shared by the Agricultural Chain manufacturer, hoping to help those in need.