Sequin embroidery machines also belong to a category of embroidery machines, which is to install sequins on the machine, which can be single sequins or double sequins.

The sequin embroidery machine is composed of a number of sequins and stitches. The sequins are made of materials with hard texture, smooth surface and high smoothness, with different colors, sizes and shapes to make the embroidery unique.

Usually the process of setting the sequins is: the sequin device (distributor) places a sequin on the fabric in the specified direction, and at the same time the embroidery needle pierces the fabric at the center of the sequin to fix the position of the sequin, and then back and forth along the outer edge of the sequin with this as the center. Puncture a few stitches to wrap the sequins so that they fit snugly on the fabric.

It can be seen that the sequin dispenser and the embroidery needle move at the same time and cooperate with the movement of the embroidery frame to complete the sequin action. In order to ensure high embroidery quality, it is necessary to avoid the collision of the dispenser and the embroidery thread during the feeding process to cause flying pieces and thread breakage. And in the embroidery process, avoid embroidering needles on the sequins, and plan the embroidery sequence to reduce unnecessary stitches under the premise of meeting the requirements of the sequin distribution shape.

Main features:

Maximum speed of flat rust: 1000rpm, maximum speed of cap rust: 850rpm

Motor trimming, low noise.

The color change of the motor and linear guide rail makes the color change more accurate.

Support optional color-changing needle position drive and detection system

The system memory can reach 2 million stitches. Can store 200 patterns, support Chinese pattern names, with USB interface

Built-in disk, can directly read disk patterns in Tajima and BEHRINGER format

The maximum stitch step is 12.7mm and the minimum is 0.1mm.

Single-side double sequin device: Two sequin reels can be installed on the same sequin device at the same time, which can overlap and lock sequins of different diameters up and down to increase machine embroidery patterns. (This device can be configured on the left and right sides of the machine or both at the same time, so that the output can be greatly increased.)

The main function:

Support flat embroidery, cap embroidery, garment embroidery (left sequins and right simple cording embroidery are optional)

Equipped with advanced integrated embroidery frame frame drive system.

Automatic/manual thread trimming.

It has the function of power-off protection. If the power is cut off in the middle of embroidery, the pattern can continue to be embroidered in the state before the power is turned on when the power is turned on.

It has the functions of retreat and mending embroidery, repeated embroidery, and combined pattern embroidery.

With pattern rotation. Zoom, delete, copy, output functions.

It has the functions of inserting, modifying, deleting, copying, outputting and quick editing of pattern needles.

It has the functions of positioning idling and high and low speed idling. If you specify empty travel, you can skip the actual operation, just move the frame according to the embroidery stitches, and display the moving needle tree, and you can directly enter the number of stitches to move the frame to the specified number of stitches; you can also move the frame by color , Move directly to the previous or next color.

Synchronous disk management function. When the machine is running, it can read and write disks, edit patterns and other operations at the same time to improve work efficiency.

For more product information, please click here: sequins beads embroidery machine.