Storage method: Pu Air Hose should be stored and placed in a way that does not bear excessive stress, elongation or deformation, and avoid contact with sharp objects or the ground. Whenever possible, use storage racks to store hose products.

　　 Coiled hoses or hose assemblies should be stored flat, not stacked.

　　 If stacking is unavoidable, the height of the stack should be limited, that is, the limit should not cause permanent deformation of the hoses stacked on the bottom layer. Coiled hose products must not be hung on wooden stakes.

　　 The hose and hose assembly supplied in a straight state should be stored flat and not bend. Large diameter hoses used in the petroleum industry should be installed at the ends.

　　Animal bites: hose products should be protected from rodents. If there is such a danger, the product should be provided with appropriate protection.

　　 Out of the warehouse: It should be noted that the hose products out of the warehouse are stored under the correct storage conditions and consistent with their intended use. Therefore, the marking of different types of hose products in the inventory is very important. For hose assemblies with non-permanent pipe joints, such as those with adjustable clamp-holder structure, inspections should be carried out to ensure the reliable performance of the pipe joints.

　　Return to warehouse: Before the used hose assembly is returned to storage, the conveyed materials are emptied. Pay more attention to hoses that are used to transport chemicals, explosive, flammable or corrosive materials. After cleaning and before returning to storage, the hose should be inspected to determine its suitability for continued use.

If you are interested in Air Filter Regulator, welcome to contact us!