The chain plate of Silent Chain is very convenient in industrial production and transportation. The chain plate of Silent Chain is mainly made of white POM material. It can be used at a temperature of -40 to 90 ° C. It can run at high speed and can transport up to 12M with a maximum load. Up to 2100N, the toothed chain plate has extremely low noise and vibration during operation, enabling high-speed and reliable operation during transportation. Today, hzqjchain Silent Chain manufacturers will analyze the problems that Silent Chain should pay attention to in use. The inner and outer guide plates of the Silent Chain are used to prevent chain movement. The internal pirated version can fix the chain to ensure its guidance and reliability. It can be used for load and high-speed operation. The teeth of the sprocket must have guide grooves. When using the outer guide plate toothed chain plate, the gear of the sprocket is in the guide groove, the sprocket structure is relatively simple but the guide is poor, and the pin and the riveting place of the outer guide plate are easily loosened. The structure of the Silent Chain chain plate is relatively complicated. It is necessary to pay attention to the contact between the various parts of the toothed chain plate, the stiffness of the parts of the motion pair (hinge pair) between the chain links and the step length of the integral calculation of the impact meshing force. The equations of motion and routine maintenance of toothed chain links. information about Silent Chain : https://www.hzqjchain.com/product/silent-chains/